AR-400
Arm hold brake unit
This is a warner brake unit with holding arm. It is useful when there is no frame to hold brake body.
| Model | AR-400 |
|---|---|
| Static friction torque Nm | 28 |
| Rated voltage DC-V | 24 |
| Power consumption W (at 75ﾟC) | 8 |
| Weight kg | 2.1 |
1. Please use all rods by pull directions
Unit: mm
| Diameter direction | |
|---|---|
| A | 102 |
| A1 | 19 |
| A2 | 35 |
| C | 108 |
| E | 26 |
| G | 84 |
| H | 70 |
| Shaft direction | |
|---|---|
| L | 60 |
| M | 44.9 |
| O | 9.2 |
| Q | 30 |
| R | 30 |
| Mounting | |
|---|---|
| K | 4 |
| KJ | M5 |
| Shaft hole | |
|---|---|
| d | 18 |
| b | 5 |
| t | 20 |
| Mounting lot | |
|---|---|
| a | 172 |
| e | 20 |
| f | 3.2 |
| i | 8 |
| j | 20 |
| k | 6 |
| l | 50 |
| m | 38 |
| q | 21.5 |
| r | 7.6 |
| z | 7 |
| y | 9.2 |
CAD
Information obtained from CAD data should be treated as reference only, except for the dimensions shown.
Please note that bolt and tap positions may change.
All information is subject to change without notice due to quality improvement or modification.
AR-400
DXF101 KB
