EP-501
Butt shaft clutch/brake unit
This is a through shaft type/ input output included unit which warner clutch/ brake installed.
By just coupling both side shaft to driving side and loading side, you can start to use immediately.
| Model | EP-501 | |
|---|---|---|
| Clutch | Brake | |
| Static friction torque Nm | 70 | 55 |
| Rated voltage DC-V | 24 | |
| Power consumption W (at 75ﾟC) | 23 | 21 |
| Weight kg | 14 | |
1. This figure is EP-400. Details are with some variation depending on the model.
2. The installed clutch and brake are customized for EP series
Unit: mm
| Diameter direction | |
|---|---|
| A | 204 |
| B | 75 |
| C | 102 |
| E | 40 |
| G | 12 |
| H | 202.5 |
| Shaft direction | |
|---|---|
| L | 375 |
| M | 227 |
| N | 101 |
| O | 40 |
| P1 | 187.5 |
| P2 | 187.5 |
| R | 129.5 |
| Z | 12 |
| Shaft edge | |
|---|---|
| Q | 56 |
| QK | 47 |
| d | 22 |
| b | 7 |
| h | 7 |
| t | 4 |
CAD
Information obtained from CAD data should be treated as reference only, except for the dimensions shown.
Please note that bolt and tap positions may change.
All information is subject to change without notice due to quality improvement or modification.
EP-501
DXF191 KB
